13. Maintenance and service
KFG KFGS KFGL KFGC
13.1 General information
The following maintenance table contains an
overview of the inspections and maintenance
work that must be performed on a regular
basis.
The maintenance intervals depend on custom-
er-specific settings and operating conditions.
The customer is therefore responsible for de-
termining and observing the maintenance in-
tervals on its own.
All work beyond this scope must be
performed by authorized SKF Service
establishments.
13.3 Service
If you encounter problems or have any ques-
tions, please contact our sales and service
centers or our representatives abroad.
A list with current addresses is available on the
Internet at:
www.skf.com/lubrication
13.2 Maintenance and repair
The following maintenance and repair work
must be performed on a regular basis:
Regularly inspect system components
for leaks
Visually inspect lubrication of bearings
Inspect electrical cables for damage
Inspect electrical connections and contacts
The basic function of the control unit and
system components can be inspected by
triggering an interim lubrication
Inspect electrical connections in case of
Replace defective fuses with new fuses of
the same performance and characteristics
The purity of the lubricants used is the
decisive factor in the service life of the
pump elements.
Page 93
EN
To Next Page
Loading...
