KFG KFGS KFGL KFGC
Page 9
EN
1.1 Intended use
Pump units of SKF's KFG, KFGS, KFGL and
KFGC series are used to supply centralized lu-
brication systems in vehicles, systems and ma-
chines. They deliver oils and greases (up to
NLGI Grade 2).
The use of synthetic oils requires prior approval
from SKF Lubrication Systems Germany GmbH.
Any other usage is deemed non-compliant
with the intended use.
Hazardous materials of any kind, especially the
materials classified as hazardous by CLP
Regulation EC 1272/2008 may only be used to
fill SKF centralized lubrication systems and
components and deliv-ered and/or distributed
with the same after consulting with and re-
ceiving written approval from SKF.
The product described here is neither designed
nor approved for use in conjunction with gas-
es, liquefied gases, pressurized gases in solu-
tion, vapors and such fluids whose vapor pres-
sure exceeds normal atmospheric pressure
(1013 mbar) by more than 0.5 bar at their
Assembly instructions
maximum permissible temperature.
Unless specially indicated otherwise, products
from SKF Lubrication Systems Germany GmbH
are not approved for use in potentially explosive
areas as defined in the ATEX Directive
2014/34/EC.
1.2 Authorized personnel
Only qualified technical personnel may install,
operate, maintain, and repair the products de-
scribed in the assembly instructions. Qualified
technical personnel are persons who have
been trained, assigned and instructed by the
operator of the final product into which the de-
scribed product is incorporated. Such persons
are familiar with the relevant standards, rules,
accident prevention regulations, and assembly
conditions as a result of their training, experi-
ence, and instruction. They are authorized to
identify and perform necessary actions while
avoiding any risks which may arise.
The definition of qualified personnel and the
prohibition against employing non-qualified
personnel are laid down in DIN VDE 0105 and
IEC 364.
To Next Page
Loading...
