KFG KFGS KFGL KFGC
Page 13
EN
SKF Lubrication Systems Germany
GmbH supports customers in the
selection of suitable components for
feeding the selected lubricant and in
the planning and design of a centralized
lubrication system.
Please contact SKF Lubrication Systems
Germany GmbH if you have further questions
regarding lubricants. Lubricants can be tested
in the company's laboratory for their suitability
for pumping in centralized lubrication systems
(e.g., "bleeding").
You can request an overview of the lubricant
tests offered by SKF Lubrication Systems
Germany GmbH from the company's Service
department.
2.3 Approved lubricants
Warning!
Only lubricants approved for the prod-
uct may be used. Unsuitable lubricants
can lead to failure of the product and to
property damage.
Warning!
Different lubricants cannot be mixed, as
mixing may result in damage and ne-
cessitate costly and complicated clean-
ing of the product/lubrication system.
It is recommended that an indication of
the lubricant in use be attached to the
lubricant reservoir in order to prevent
accidental mixing of lubricants.
The product described here can be operated
using lubricants that meet the specifications in
the technical data.
Note that in rare cases, there may be lubricants
whose properties are within permissible limit
values but whose other characteristics render
them unsuitable for use in centralized lubrica-
tion systems. For example, synthetic lubricants
may be incompatible with elastomers.
Assembly instructions
To Next Page
Loading...
