SKF KFGL - Info - Information Mode; Conig. - Coniguration Mode

10.2.2 Info - Information mode
Information mode is used to query the hard-
ware identification code and the runtimes
stored thus far for the system, motor, and err
time (system runtime, motor runtime, error
time).
Note!
No values can be entered or modified
in information mode.
Selection in information mode is per-
formed by briefly pressing one of the
-
keys.
1
2
3
Info menu KGFL, Fig. 21
Info
Config
Status
10. KFGL control unit
KFGL
Base and main menu
Step Key Display Description
1
Entry mask/language selection
The German version is active by default
(flashing)
Press the “up” arrow key to change to the
English version
Press the Enter key to confirm.
2
Main menu
Service
English
German
Info
Config
Status
Main menu items
Display Description
Info

Config.uration
Parameter settings
Status
Display current status of control unit
Service
Service menu
Menu level only enabled for SKF service personnel
Page 84
EN