3. Transport, delivery, and storage
Warning!
The product must not be tilted or
dropped.
3. Transport, delivery, and storage
SKF Lubrication Systems Germany GmbH
products are packaged in accordance with
standard commercial practice according to the
regulations of the recipient's country and DIN
ISO 9001. During transport, safe handling
must be ensured and the product must be
protected from mechanical effects such as im-
pacts. The transport packaging must be
marked "Do not drop!"
There are no restrictions for land, air or sea
transport. After receipt of the shipment, the
product(s) must be inspected for damage and
for completeness according to the shipping
documents. The packaging material must be
preserved until any discrepancies are resolved.
SKF Lubrication Systems Germany GmbH
products are subject to the following storage
conditions:
3.1 Lubrication units
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure
and shield nearby sources of heat
3.2 Electronic and electrical devices
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure
and shield nearby sources of heat
3.3 General notes
The product(s) can be enveloped in plastic
film to provide low-dust storage.
Protect against ground moisture by
storing on a shelf or wooden pallet.
Bright-finished metallic surfaces,
especially wearing parts and assembly
surfaces, must be protected using
long-term anti-corrosive agents before
storage.
At approx. 6-month intervals: Check for
corrosion. If there are signs of corrosion,
reapply anti-corrosive agents.
Drives must be protected from
mechanical damage.
KFG KFGS KFGL KFGC
Page 51
EN
To Next Page
Loading...
