Documentation overview
KFG KFGS KFGL KFGC
Description/
Document number
LC502 control unit for ProFlex
progressive centralized lubrication systems
951-180-005-EN
LC502 control unit for MonoFlex
single-line lubrication systems
951-180-004-EN
KFG; KFGS; KFGC (CAN bus) for
vehicle lubrication
951-170-204-EN
CAN bus control system description
951-130-502-EN
Page 8
EN
Assembly instructions
The operator of the described prod-
uct must ensure that the assembly
instructions are read and understood by
all persons tasked with the assembly,
operation, maintenance, and repair of
the product. The assembly instructions
must be kept readily available.
Note that the assembly instructions
form part of the product and must
accompany the product if sold to a new
owner.
1. Safety instructions
In addition to the assembly instructions,
general statutory regulations and other
regulations for accident prevention
and environmental protection must be
observed and applied.
The described product is manufactured in ac-
cordance with the generally accepted rules and
standards of industry practice and with occu-
pational safety and accident prevention regula-
tions. Risks may, however, arise from its usage
and may result in physical harm to persons or
damage to other material assets. Therefore the
product may only be used in proper technical
condition and in observance of the assembly
instructions. In particular, any malfunctions
which may affect safety must be remedied
immediately.
To Next Page
Loading...
