EasyManua.ls Logo

SKF KFGL - Page 106

SKF KFGL
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17. Accessories
External control units
Application Type designation
Order number
Features
Piston distributor for
single-line systems
EXZT2A02-E Pulse generator/counter with adjustable interval time, interval time extension, monitor-
ing of pressure build-up and reduction, and fill level monitoring
Piston distributor for
single-line systems
EXZT2A03-E Pulse generator/counter with selectable monitoring time, monitoring of fill level and
pump cycle time (stroke monitoring), adjustable delay time, and interval time extension
Progressive systems EXZT2A05-E Pulse generator/counter with adjustable interval time, interval time extension, pressure
build-up monitoring, pulse monitoring, and fill level monitoring
Progressive systems EXZT2A06-E Pulse generator/counter with selectable monitoring time, monitoring of fill level and
pump cycle time (stroke monitoring), adjustable delay time, interval time extension, and
pulse monitoring
Piston distributor for
single-line systems
EXZT2A07-E Pulse generator/counter with adjustable interval time, interval time extension, pressure
build-up monitoring, fill level monitoring, and fill level pre-warning
Electronic timer for
centralized lubrication
systems
IG351-10-E Pulse generator with adjustable interval time, adjustable pump cycle time, and fill level
monitoring with NO-contact
Piston distributor for
single-line systems
IGZ38-30-E Pulse generator/counter with adjustable interval time and pressure build-up monitoring,
and fill level monitoring with NC contact (wire breakage monitoring)
Piston distributor for
single-line systems
IGZ36-20-E Pulse generator/counter with adjustable interval time, monitoring of pressure build-up
and reduction, and adjustable delay time
Piston distributor for
single-line systems
IGZ36-20-S6-E Same as IGZ36-20-E, but with fill level monitoring with NC contact
(wire breakage monitoring)
The operating instructions/functional description of the corresponding control unit
must be observed!
Page 106
EN

Table of Contents

Related product manuals