951-170-213-EN
SKF Lubrication Systems Germany GmbH
2. Industriestrasse 4 · 68766 Hockenheim · Germany
Tel. +49 (0)62 05 27-0 · Fax +49 (0)62 05 27-101
www.skf.com/lubrication
SKF Lubrication Systems Germany GmbH
Motzener Straße 35/37 · 12277 Berlin · Germany
PF 970444 · 12704 Berlin · Germany
Tel. +49 (0)30 72002-0 · Fax +49 (0)30 72002-111
www.skf.com/lubrication
The contents of this publication are the copyright of the publisher and may not be reproduced in whole or in part
without permission of SKF Lubrication Systems Germany GmbH. Every care has been taken to ensure the accuracy
of the information contained in this publication. However, no liability can be accepted for any loss or damage,
whether direct, indirect or consequential arising out of use of the information contained herein.
All SKF products may be used only for their intended purpose as described in these assembly instructions with
associated operating instructions. If assembly/operating instructions are supplied together with the products, they
must be read and followed. Not all lubricants can be fed using centralized lubrication systems. SKF can, on request,
inspect the feedability of the lubricant selected by the user in centralized lubrication systems. Lubrication systems
and their components manufactured by SKF are not approved for use in conjunction with gases, liquefied gases,
pressurized gases in solution, vapors or such fluids whose vapor pressure exceeds normal atmospheric pressure
(1013 mbar) by more than 0.5 bar at their maximum permissible temperature.
Hazardous materials of any kind, especially the materials classified as hazardous by CLP Regulation EC
1272/2008 may only be used to fill SKF centralized lubrication systems and components and deliv-ered and/or
distributed with the same after consulting with and receiving written approval from SKF.
To Previous Page
Loading...
