70
Fig. 6.68
4
5
6
ADJUSTMENTS
6.8.2 ADJUSTING PROSEM P
In model P, unlike model K, the press wheel is in charge of adjusting the planting depth. There-
fore, to adjust the planting depth follow these steps:
1- Loosen the securing lever (4,
Fig. 6.68)
2- Turn the crank (5, Fig. 6.68) to
set the desired planting dep-
th. For this purpose, use the
indicator and the scale (6, Fig.
6.68) which is graduated from
0 to 10.
3- Fix the planting depth by pres-
sing the lever (4, Fig. 6.68).
Fig. 6.69
Planting depth
Ground level
To Next Page
Loading...
