Sola PROSEM K BASIC Series - Insectiside Microgranulator (Optional)

94
Fig. 6.129
A
Fig. 6.128
ADJUSTMENTS
Z =
D
TABLE
D
DESIRED
x V
If the specic weight of the insecticide to be
used is dierent from the ones in the dosing
tables, apply the following formula to calculate
the Kg/ha which are going to be spread:
WHERE:
Z = Kg/ha which are going to be spread.
V = Kg/ha in the table depending on the do-
sing adjustment, the row spacing and the
insecticide’s specic weight shown in the
table
.
Weight
T
= specic weight shown in the ta-
ble depending on the selected
value “V”
Weight
R
= actual specic weight of the in-
secticide.
In case to spread insecticide at a dierent
row spacing from the ones in the dosing
tables, apply the following formula:
WHERE:
Z = Kg/ha which are going to be spread.
V = Kg/ha in the table depending on the dosing adjustment, the row spacing and the in-
secticide’s specic weight shown in the table.
D
TABLE
= row spacing shown in the table.
D
DESIRED
= desired row spacing.
VERY IMPORTANT:
D
TABLE
> D
DESIRED
Z =
Weight
T
x V
Weight
R
6.19 INSECTICIDE MICROGRANULATOR
(OPTIONAL)
In order to adjust the distribution of the insecticide micro
granulator, it is necessary to know the row spacing, the
quantity of product to be distributed per hectare and its
specic weight.
It should be taken into account that there is a wide va-
riety of products, each one with its par-
ticular density and granulometry. There-
fore, precise adjustments are dicult to
achieve.
Micro granulated insecticide is placed
along with the seeds (Fig. 6.129).