SolarCity H6 - 10 - Troubleshooting and Maintenance; 10.1 Intended Uses; 10.2 General Troubleshooting Steps

To Next Page

To Previous Page

Chapter 1 - Welcome

9.1.4 - AC Output

The AC output specifications of the SolarCity H6 inverter are:

• Nominal/Continuous Output Power (L-N / L-L): 3000W/6000W

• Max. Surge Power (L-N / L-L): 3400W/6800W for 10 seconds

• Utility Grid Support: Split-phase, three (3) wire connection

• Operating Voltage Range: 105V to 132V / 211V to 264V (ANSI C84.1)

• Nominal/Continuous Output Current: 25A

• Peak Output Current: 28.3A (surge)

• Nominal Frequency: 60Hz

• Frequency Range (adjustable): 59.3Hz-60.5Hz (44Hz-65Hz)

• Nighttime (standby) Consumption: <6W

• Total Harmonic Distortion: I

THD

, V

THD

<5% (at nominal power)

• Power Factor: >0.995 (0.8ind-0.8cap; at nominal power)

• AC Overcurrent Protection: 35A

• Off-Grid Transition Time: <2 seconds

• Conduit and Wire Size: Two (2) 3/4” conduit; 8-10AWG

9.1.5 - Battery Pack Interface

The battery pack interface specifications of the SolarCity H6 inverter are:

• Operating Battery Pack Voltage Range: 430-550V

• Max. Battery Pack Voltage @ Interface: 570V

• Nominal/Surge Current: 14.3A / 20A

• DC Disconnect: Internal (same as the PV disconnect)

• Internal Fuses (for Battery Pack): Two (2) 25A

• Max. Continual Charge Power: Up to 5000W

• Max. Continual Discharge Power: 5000W

• Surge Power: 7,000W (for 10 seconds)

• Communication Interface to the Inverter: CAN

• Dark Start Functionality: Yes

• Conduit and Wire Size: 1 x 3/4” (plus 1 x 1/2” optional); 8-12AWG HV; 16-24AWG comms