SolarCity H6 - Clearances; Figure B-2: Minimum SMART RSD Clearances

129
Copyright 2017 SolarCity Corporation. All rights reserved.
Appendix B - SMART RSD
B.1.2 - Clearances
The minimum clearance requirements (see Figure B-2 ) for mounting the SMART RSS are:
• Between bottom of PV module surface and top of SMART RSS: 0.6” (15mm)
• Between roof surface and bottom of SMART RSS: 0.6” (15mm)
• Between roof surface and back of PV module laminate: 2.6” (66mm))
Figure B-2: Minimum SMART RSD clearances