81
Copyright 2017 SolarCity Corporation. All rights reserved.
Chapter 1 - Welcome
• CosPhi: -0.80 to -1.00 (Inductive)
• Store and accept: Select either Yes or No.
6.2.8 - ZigBee (Xbee) Information Menu
This menu displays the following information about ZigBee communications:
• Current status: This can be one of the following:
- Searching for Comm Network
- Authorizing Communication
- Connected to Server
• Xbee Channel: Wireless channel being used by the ZigBee antenna, such as 0C10.
• MAC Address: Hardware address of the ZigBee controller, such as 0013A20040C559F0.
• Xbee PAN-ID: ID of the ZigBee unit, such as 1AB7
• Radio signal: Displays signal strength in a bar graph, text indication, and signal strength in
decibels per meter (dBm). The text indication will display one of the following:
- Excellent: When dBm is >= -70dBm (three bars).
- Good: When dBm >= -90dBm and is less than -70dBm (two bars).
- Poor: When dBm is less than -90dBm (one bar).
Note: Grid settings are password protected. Contact Technical Support or
the SolarCity Hotline for this information. Utility approval may be required
to adjust these settings.
To Next Page
Loading...