SolarCity H6 - 8 - Basic Operation; 8.1 Powering the Inverter On

75
Copyright 2017 SolarCity Corporation. All rights reserved.
Chapter 1 - Welcome
6.1.1 - Status LEDs
As shown in Figure 6-1 , the SolarCity H6 inverter includes the following three LEDs:
The LEDs will either remain off, illuminate steadily, or blink to indicate various system
statuses. See Figure 6-2 .
Figure 6-2: Interpreting the SolarCity H6 inverter LEDs
Label Designation Color
Operation Operation Green
Fault Error Red
Alarm/Warning Warning Yellow
Note: The SolarCity H6 inverter can display additional LED combinations
that are beyond the scope of this Guide. Please contact Technical
Support if you see one of these combinations.
LABEL CONDITION COLOR/ACTION
Normal operation Green LED illuminated solid.
Other LEDs are off.
Firmware upgrade Green LED blinking rapidly (0.5s).
Other LEDs are off.
Waiting for sun/ Night mode/
Sleep time
Green LED blinking slowly (10.0s).
Other LEDs ar e off .
Arc Fault, Ground Fault, or
Fireman Switch activated
Red LED illuminated solid.
Other LEDs are off.
Warning Amber LED illuminated solid.
Other LEDs are off.
Lo
st communications Amber LED blinking.
Other LEDs are off.