H6 Hybrid Inverter - Installation & Operation Guide
56
Copyright 2017 SolarCity Corporation. All rights reserved.
WARNING: THE APPROPRIATE LOCAL UTILITY MUST PROVIDE APPROVAL
BEFORE CONNECTING THE SOLARCITY H6 INVERTER TO THE AC
DISTRIBUTION GRID, AS REQUIRED BY NATIONAL AND STATE
INTERCONNECTION REGULATIONS. THE INTERCONNECTION MUST BE
PERFORMED BY QUALIFIED PERSONNEL.
CAUTION: THE INVERTER IS FACTORY SEALED TO MAINTAIN ITS NEMA 4X /
IP67 RATING AND CONTAINS NO USER-SERVICEABLE PARTS. ANY ATTEMPT
TO OPEN OR REPAIR THE INVERTER WILL VOID THE INVERTER WARRANTY.
CAUTION: THE INVERTER MUST BE PERMANENTLY MOUNTED BEFORE ANY
ELECTRICAL WIRING CAN BE CONNECTED TO THE INVERTER.
CAUTION: ALL ELECTRICAL INSTALLATIONS MUST BE CARRIED OUT
ACCORDING TO THE APPLICABLE ELECTRICAL STANDARDS ON SITE AND
THE NATIONAL ELECTRICAL CODE ANSI/NFPA 70.
To Next Page
Loading...