SolarWinds UDT - Viewing Secure Data on the Web; Handling Counter Rollovers

License Details
This is an information-only page that displays details about all SolarWinds
products that you currently have installed. about both your Orion license and
your monitored network. This page also shows the version numbers of the
SolarWinds UDT products you are running and the versions of associated DLLs.
For more information about managing your license, see "Maintaining Licenses
with License Manager".
Viewing Secure Data on the Web
In the interest of security, sensitive network information, such as community strings,
logins, and passwords, is not viewable in the web console. However, if you have
secured your network, you may check Allow Secure Data On Web (advanced) in the
Calculations & Thresholds area of the Polling Settings page to allow the passage of
community strings through the web console.
Note: This setting does not affect the display of custom reports that you export to the
web. For more information see "Creating and Viewing Reports"
Handling Counter Rollovers
The Counter Rollover setting configures SolarWinds UDT to properly handle counter
rollovers. SolarWinds UDT is capable of handling either 32-bit or 64-bit counters, but,
by default, SolarWinds UDT assumes counters are 32-bit. 32-bit counters have a
maximum value of 2
32
, or 4,294,967,296, and 64-bit counters, if they are supported by
your network devices, have a maximum value of 2
64
, or 18,446,744,073,709,551,616.
Note: The 32-bit counters option is designated as Method 1 in the Counter Rollover
field on the Polling Settings page.
The following procedure designates the type of counter-hanlding used by SolarWinds
UDT.
1.
Log in to the web console as an administrator.
2. Click Settings in the top right of the web console, and then click Polling Settings
in the Settings grouping of the Orion Website Administration page.
127
Viewing Secure Data on the Web