SolarWinds UDT - Using Orion Report Scheduler with HTTPS

15.
If you want to email the report, complete the following procedure:
a. Confirm that either Email the Web Page (as HTML) or Email the Web
Page (as PDF) are selected, and then click Continue.
b. Provide required email addresses and a subject in the appropriate fields
on the Email To tab.
c. Provide a name and reply address on the Email From tab.
d. On the SMTP Server tab, type the hostname or IP address and confirm
the port number of the server used to send email from the Server.
e. Click Continue.
16.
If you want to print the report, complete the following steps:
a. Select Print the Web Page, and then click Continue.
b. Select the Printer, Orientation, and number of Copies you want to print.
c. Click Continue.
17.
Enter the user name and password for the Windows account that will email the
report.
18. Click Continue.
19.
Add any additional comments or notes about this job, and then click Finish.
Using Orion Report Scheduler with HTTPS
If you are using HTTPS to view reports in the Orion Web Console, your HTTPS server
may require the Orion Report Scheduler to provide a trusted certificate before the
requested report may be printed or sent. To use Orion Report Scheduler with HTTPS,
either provide valid certificates to all users accounts requesting reports from the
HTTPS server using Orion Report Scheduler or disable certificate checking in each of
the browsers used by your Orion Report Scheduler users, as shown in the following
procedure.
To disable certificate checking:
1.
If you are configuring Internet Explorer, complete the following steps:
a. Open Internet Explorer on the user computer.
b. Click Tools > Internet Options, and then click the Advanced tab.
c. In the Security section, confirm that the following options are cleared:
n Check for publisher's certificate revocation
n Check for server certificate revocation (requires restart)
n Warn about invalid site certificates
280
Using Orion Report Scheduler with HTTPS