SolarWinds UDT - Trap Alert Variables; Trap Date;Time Variables

Change the status of an interface
SolarWinds NPM can change the status of an interface from which a trap is
received. Designate the status to which .the interface should change.
Note: This action is only available and functional for installations of Orion Network
Performance Monitor. For more information, see the SolarWinds Network
Performance Monitor Administrator Guide.
Trap Alert Variables
The following variables can be used in trap alert messages with the SolarWinds UDT
Trap Server. You must begin each variable with a dollar sign and enclose each
variable identifier in curly braces as, for example, ${VariableName}.
Note: Trap alerts may also use any valid node variables.
See:
n
Trap Date/Time Variables
n
Other Trap Variables
Trap Date/Time Variables
See also: Other Trap Variables
Trap Date/Time
Variable
Description
${AbbreviatedDOW} Current day of the week. Three character abbreviation.
${AbbreviatedMonth} Current month of the year. Three character abbreviation.
${AMPM}
AM or PM corresponding to current time (before or after
noon)
${D} Current date. (MM/DD/YYYY format)
${DD} Current day of the month (two digit number, zero padded)
${Date} Current date. (MM/DD/YYYY format)
307
Trap Alert Variables