Managing the Orion Web Console
Response Time
Monitored devices experiencing response times longer than the value set for
the Error Level display in High Response Time reports and resources. Gauges
for these devices also display as bold red. Devices experiencing response times
longer than the value set for the Warning Level, but shorter than the value set
for the Error Level, also display in High Response Time reports and resources.
Gauges for these devices also display as red.
SolarWinds UDT calculates response time using ICMP ping requests made on
the Default Node Poll Interval. Orion pings monitored devices and records the
results of the ten most recent ping attempts. Average Response Time is
expressed as the average response time of these last 10 ping requests. If
SolarWinds UDT does not receive a ping response within the Default Poll
Interval, SolarWinds UDT will attempt to ping the nonresponsive device once
every 10 seconds for the period designated as the Warning Interval. For more
information, see "Orion Platform Polling Settings"
Setting General Thresholds
The following procedure configures General Thresholds.
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console.
3.
Click Thresholds in the Settings group of the Orion Website Administration
page.
Note: For more information about General Thresholds, see "General Threshold
Types"
4. Provide appropriate values for Error Level, High Level, or Warning Level for
selected thresholds.
Customizing Views
Orion Web Console views are configurable presentations of network information that
can include maps, charts, summary lists, reports, events, and links to other resources.
Customized views can then be assigned to menu bars.
n
Creating New Views
n
Editing Views
n
Configuring View Limitations
130
To Next Page
Loading...