Creating and Viewing Reports
Filter Results Options Tab
When you create or modify reports, the Filter Results tab allows you to generate filter
conditions for field data by selecting appropriate descriptors from the linked context
menus. Results filters are configured as follows.
To configure results filters:
1.
Click Browse (...), and then select from the following options:
n Select Add a new elementary condition to generate a condition that is
based on a direct comparison of network object data fields.
n Select Add a new advanced elementary condition to generate a
condition based on a comparison of device data fields and values.
n Select Add a new complex condition to define a condition that filters
other defined conditions.
n Select Delete current condition to remove a selected condition.
n Select Move current condition forward or Move current condition
backward to change the order of your conditions accordingly.
Note: The lists of available linked descriptors are dynamically generated
in consideration of all other variables within the same condition. For
more information about condition groups and their application, see
"Understanding Condition Groups"
2.
Check or clear individual filter conditions to enable or disable their application,
respectively, to your report.
Top XX Records Options Tab
When you create or modify reports, the Top XX tab allows you to limit the number of
records that are shown in your report to either a top number or a top percentage of
all results. Top XX options are configured as shown in the following procedure.
To configure Top XX records:
1. If you want to show all records in your report, select Show All Records.
2.
If you want to specify a truncated list of eligible items for your report,
complete the following steps:
a. select either Show only the Top number Records or Show the Top
percentage % of Records
b. Provide appropriate number or percentage values.
269
To Next Page