Creating Custom Properties
11.
Specify the fields from your file on the left that you want to import by clicking
corresponding blank cell on the right, and then select the target field that you
want your data field to populate.
Note: Click the cell to enable a menu. Use the menu items to select the target
field that you want your data to populate.
12. If you have specified all cell matches between your data and the Orion
Platform database, click Import.
13. If your import is successful, confirm the count of successfully imported rows,
and then click OK.
Custom Property Editor Settings
The Custom Property Editor Settings window allows you to customize the display for
nodes and volumes.
Note: Orion Network Performance Monitor users may also customize the display for
interfaces.
To configure Custom Property Editor settings:
1. Click Start > All Programs > SolarWinds Orion > Grouping and Access Control >
Custom Property Editor.
2. Click File > Settings.
3.
Click Node Editing and check the system properties you want to see in the Edit
Node Properties window. Repeat for Volume Editing.
4.
If you want to enable Auto-Search, click Auto-Search, and then check Enable
Auto-Search.
Note: With Auto-Search enabled, the current column is searched as you type.
Select a cell and then press Enter to edit its contents. With Auto-Search
disabled, typing will begin editing the cell.
Editing Custom Properties
The Custom Property Editor allows you to easily modify custom properties.
Note: Orion Network Performance Monitor users may also edit custom properties for
interfaces.
To edit a custom property:
1. Click Start > All Programs > SolarWinds Orion > Grouping and Access Control >
Custom Property Editor.
313
To Next Page
Loading...