SolarWinds UDT - Using Filters in Edit View; Creating Custom Properties Filters

2. Click Properties > Edit Object Properties, where Object is Node or Volume, as
appropriate.
3.
Click the cells in the table that you want to edit, and then enter or modify the
cell contents, as necessary.
4. If you want to create or edit a filter for your custom properties, click No
Active Filter or Filter Active, and then define the filter that you want to apply.
For more information, see "Using Filters in Edit View."
5. If you are satisfied with your edits, click OK.
Using Filters in Edit View
Filtering is available in the Edit Custom Properties windows for all devices, and you
can apply filters to manipulate available data views. Custom Property Editor allows
you to edit the text within custom property fields to which a filter is applied. The
following procedures show how to use filters within Custom Property Editor.
See:
n
Creating Custom Properties Filters
n
Removing Custom Properties Filters
Creating Custom Properties Filters
The following procedure creates a custom properties filter.
Note: Orion Network Performance Monitor users may also create filters for interface
custom properties.
1. Click Start > All Programs > SolarWinds Orion > Grouping and Access Control >
Custom Property Editor.
2. Click Properties > Edit Object Properties, where Object is Node or Volume, as
appropriate.
3.
Click Filter Active or No Active Filter, and then click Apply Filter.
Note: The text of the Filter Active / No Active Filter button changes dynamically,
indicating the filter status for the currently viewed data.
4.
Click the hyperlinked text to select the appropriate criteria.
314
Using Filters in Edit View