Using Orion Platform Advanced Alerts
n
Acknowledging Advanced Alerts in the Web Console
n
Escalated Advanced Alerts
n
Viewing Alerts from Mobile Devices
Creating and Configuring Advanced Alerts
SolarWinds UDT allows you to configure advanced alerts with the following features:
n Sustained state trigger and reset conditions
n Multiple condition matching
n Automatic alert escalation
n Separate actions for triggers and resets
Advanced alerts are configured using the Advanced Alert Manager, as shown in
Creating a New Advanced Alert.
Note: If you want to configure advanced alert features, such as timed alert checking,
delayed alert triggering, timed alert resets, or alert suppression, check Show
Advanced Features at the lower left of any Advanced Alert windows. For the purposes
of this document, Show Advanced Features is always enabled.
Creating a New Advanced Alert
The following procedure creates a new advanced alert.
1. Click Start > SolarWinds > Alerting, Reporting, and Mapping > Advanced Alert
Manager.
212
To Next Page
Loading...