Node Data
Node Status
Current status of the node. (up, down, warning, unmanaged, or
unreachable)
IP Address The IP address currently assigned to the selected node
Machine
Type
The vendor icon and vendor description of the selected node
Average
Response
Time
The measured average response time of the selected node as of
the last node poll
Packet Loss
The percent of all transmitted packets that are lost by the selected
node as of the last node poll
CPU Load
The percent of available processing capacity on the selected node
that is currently used as of the last node poll
Memory Used
The percent of available memory on the selected node that is
currently used as of the last node poll
Editing Object Properties
The following procedure provides the steps required to edit monitored object
properties using the Node Management utility of the Orion Web Console.
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console, and then click Manage Nodes
in the Node & Group Management grouping.
3.
Locate the object to edit using either of the following methods:
Use the search tool above the node list to search your Orion Platform database
for either the object you want to edit or the parent node of the volume you
want to edit.
Select an appropriate Group by criteria, and then click the appropriate group
including either the node to edit or the parent of the object to edit.
4. If you want to edit the properties of a monitored node, check the node you
want to edit, and then click Edit Properties.
173
Editing Object Properties
To Next Page
Loading...