SolarWinds UDT - Enabling DNS Resolution for Wireless Nodes; Adding Endpoints to the White List; Add Endpoints to the DNA Whitelist by Adding Rules

Managing the UDT White List
Enabling DNS Resolution for Wireless Nodes
UDT uses the Orion Platform wireless component to manage wireless devices.By
default, the wireless component does not resolve a wireless node's IP address into a
hostname. To enable that, you must adjust a setting in the config file
SolarWinds.Wireless.Collector.dll.config.
1.
Open SolarWinds.Wireless.Collector.dll.config (located by default in
C:\Program Files\SolarWinds\Orion\Wireless).
2.
Modify the value of <add key="RDNSTimeout" value="0" />, changing
the "0" to "1".
3.
Save the change and restart the Orion Web Console.
See also: Managing the UDT White List
Adding Endpoints to the White List
UDT uses inclusion rules to determine which endpoints connected to UDT-monitored
devices are safe and unsafe. Endpoints UDT determines are unsafe, in that they are
not covered by White List rules, appear in the list on the Rogue Devices resource.
Through its rules the UDT White List determines which endpoints connected to UDT
enables three self-explanatory white list inclusion rules by default: Any Hostname,
Any IP Address, and Any MAC Address. With these rules enabled, all endpoints
connected to your monitored UDT devices are placed on your white list.
You add endpoints to the White List by adding or enabling rules:
n
Adding Rules
n
Enabling Rules
Add Endpoints to the DNA Whitelist by Adding Rules
You can add endpoints to the White List by adding rules (described below) or by
enabling rules.
Follow these steps to add endpoints to the White List by adding rules.
53