9. If you only want to see Syslog messages from a specific period of time,
select a time period from the Time Period menu.
10. Confirm the number of messages displayed in the Show Messages field.
11. If you want cleared or acknowledged messages to remain in the Syslog
view, check Show Cleared Messages.
12. Click Refresh to update the Syslog messages list with your new settings.
Acknowledging Syslog Messages in the Web Console
Acknowledging Syslog messages is straightforward in the Orion Web Console, as
shown in the following procedure.
1. Click Start > All Programs > SolarWinds > Orion Web Console.
2.
Log in to the Orion Web Console.
3. Click Syslog in the Views toolbar.
4.
Provide filter criteria for the Syslog messages table. For more information, see
"Viewing Syslog Messages in the Web Console"
5. Click Refresh to ensure that all selected view criteria take effect.
6. Check the messages you want to acknowledge, and then click Clear Selected
Messages.
Using the Syslog Viewer
Orion also provides the standalone Syslog Viewer application for viewing and
acknowledging Syslog messages on your network. Syslog Viewer collects Syslog
messages from your network and presents them in a readily reviewable and
searchable list so that you can easily monitor your network. The following sections
provide a guide to using the Syslog Viewer application for viewing, acknowledging,
and triggering alerts in response to Syslog messages on your network.
To open the Syslog Viewer, click Start > All Programs > SolarWinds Orion > Syslog
and SNMP Traps > Syslog Viewer.
See the following topics:
n
Viewing and Acknowledging Current Messages
n
Searching for Syslog Messages
n
Syslog Server Settings
n
Configuring Syslog Viewer Filters and Alerts
287
Acknowledging Syslog Messages in the Web Console
To Next Page
Loading...