SolarWinds UDT - Setting Default Account Menu Bars and Views

(*foo* EXCEPT *b*) AND (*all* OR *sea*) matches seafood and footfall, but not
football or Bigfoot.
Setting Default Account Menu Bars and Views
The Default Menu Bar and Views section provides several options for configuring the
default menu bar and views for your user account. The following procedure is a
guide to setting these options.
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console, and then click Manage
Accounts in the Accounts grouping of the Orion Website Administration page.
3. Select the account that you want to configure, and then click Edit.
4. Scroll down to Default Menu Bar and Views.
5.
Select a Home Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Home in the Orion
Web Console. If you are editing a user account that must have administrator
privileges, set the Home Tab Menu Bar to Admin.
6.
Select a Network Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Network in the
Orion Web Console. If you are editing a user account that must have
administrator privileges, select Admin.
7.
Select a Virtualization Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Virtualization in
the Orion Web Console. If you are editing a user account that must have
administrator privileges, select Admin.
8.
If you have installed any additional Orion Platform products, select an Orion
Platform product Tab Menu Bar from each available list.
Note: This step configures the default menu bar displayed when you click the
tab corresponding to an installed module in the Orion Web Console. If you are
editing an account that must have administrator privileges, select Admin.
9.
Select a Home Page View.
Note: If no Home Page View is specified, the default is designated to be the
same as the page that is specified in the Default Summary View field below.
10.
If the Home Page View you have selected refers to a specific network
device, select a Default Network Device by clicking Edit and selecting from the
list of available devices on the next page.
Note: If the Home Page View you have selected does not require a specific
network device, the software will select a device to display, automatically.
195
Setting Default Account Menu Bars and Views