Managing SolarWinds UDT Polling
Engines
To ensure that your polling engines are optimized to run at peak performance, you
will need to occasionally tune them. If you use more than one polling engine, you will
need to balance the load so that each engine can perform optimally.
n
Viewing Polling Engine Status in the Web Console
n
Configuring Polling Engine Settings
n
Orion Platform Polling Settings
n
Calculating Node Availability
n
Calculating a Baseline
n
Using the Polling Engine Load Balancer
n
Setting the Node Warning Level
n
Managing Packet Loss Reporting
Viewing Polling Engine Status in the Web
Console
The Orion Web Console provides the Polling Engines view, giving you immediate
insight into the performance of all polling engines in your SolarWinds installation.
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console.
3. Click Polling Engines in the Details group.
For more information about configuring the settings on this view in addition to
configuring all other available polling engine variables, see "Configuring Polling
Engine Settings."
198
To Next Page
Loading...