SolarWinds UDT - Acknowledging Events in the Web Console

Monitoring Network Events in the Web Console
5.
If you only want to see events from a specific period of time, complete
either of the following options:
n Select a predefined period from the Time Period menu.
n Select Custom from the Time Period menu, and then click the
appropriate fields to provide Begin and End dates and times.
6. In the Show X Events field, provide the maximum number of events you want to
view.
7. If you want to show all events, including events that have already been
cleared, check Show Cleared Events.
8. Click Refresh to complete your events view configuration.
Acknowledging Events in the Web Console
Acknowledging network events is straightforward in the Web Console, as shown in
the following procedure.
1. Click Start > All Programs > SolarWinds > Orion Web Console.
2. Log in to the Orion Web Console, and then click Events in the Views toolbar.
3.
Provide appropriate filter criteria for the displayed events. For more
information, see "Viewing Event Details in the Web Console"
4. Click Refresh to ensure that all selected view criteria take effect.
5. Check individual events to acknowledge or click Select All.
6. Click Clear Selected Events.
210