The following procedure sets or changes management states for monitored nodes in
the Orion Web Console.
Note: Setting a node to an unmanaged state automatically suspends the
management of all interfaces and volumes on the selected node.
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console.
3. Click Manage Nodes in the Node & Group Management grouping of the Orion
Website Administration page.
4.
Locate the node to manage using either of the following methods:
n Use the search tool above the node list to search your Orion Platform
database for the device you want to manage.
n Select an appropriate Group by criteria, and then click the appropriate
group including the node to manage.
5. Check the node to change, and then click Unmanage or Remanage, as
appropriate, for the selected node.
6. If you have selected Unmanage, provide start and end times and dates for
your management suspension, and then click OK.
Unscheduled Device Polling and Rediscovery
SolarWinds UDT polls devices for statistics and status regularly, according to the
polling settings available for configuration on the Polling Settings view in the Orion
Web Console. For more information, see "Orion Platform Polling Settings"
Sometimes, however, it may be necessary to conduct an unscheduled poll or
rediscovery of a monitored device. The Node Management utility gives you this
ability, as shown in the following procedure.
To perform an unscheduled poll or rediscovery:
1.
Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console.
3. Click Manage Nodes in the Node & Group Management grouping of the Orion
Website Administration page.
177
Unscheduled Device Polling and Rediscovery
To Next Page
Loading...