SolarWinds UDT - Adding a Deleted Port Back into UDT; Orion Platform Components

Troubleshooting
Adding a Deleted Port Back into UDT
Issue
You deleted a device port from UDT but now need to monitor it again.
Solution
Re-run UDT Port Discovery.
To add a UDT port:
1.
Open the Orion Web Console.
2. Click Settings > UDT Settings > User Device Tracker Discovery.
3.
Select the node(s) from which you deleted the port(s).
4. Click Next to run the discovery.
5.
Select the ports to acitively monitor in IMPORT PORTS.
6.
Click + to expand Advanced Filtering Options.
7. Select 'Show Deleted Ports'.
8. Click 'FILTER ALL PORTS BELOW >', then click + next to the node(s) on which you
deleted the ports. (You should see all ports including the deleted ones.)
9.
Click the deleted ports. They are added back into UDT.
10. Click Submit.
Orion Platform Components
SolarWinds UDT runs on a platform of components common to all SolarWinds
networking products. The following sections provide basic checks for making sure the
Orion Platform common components are working properly.
n
Verify Program Operation
n
Stop and Restart
n
Run the Configuration Wizard
n
Using Full Variable Names
n
Working with Temporary Directories
n
Slow Performance on Windows Server 2008
356