9. Review the properties you defined. When you are ready, click OK, ADD NODE.
Note: The Domain Controller Polling Interval indicates how often UDT updates its information about
user activity within the domain.
10. Click Advanced Settings under UDT Settings on the User Device Tracker Settings page (Settings > UDT
Settings).
11.
Review and adjust as needed the AD User Update Interval to match the rate at which AD user
information is updated. This setting determines how often UDT polls the AD domain controller for
user information.
12.
After the polling interval, review the user information available from this AD domain controller in the
All User Logins resource on the UDT Summary view.
Editing an AD domain controller
Follow these steps to edit an AD domain controller.
1. Click Manage Active Directory Domain Controller in the UDT Credentials area in UDT Settings
(Settings > UDT Settings).
2.
Select the AD domain controller in the list.
3. Click Submit.
Assign a credential to an AD domain controller
Follow these steps to assign a credential to an AD domain controller.
1. Click Manage Active Directory Domain Controller in the UDT Credentials area in UDT Settings
(Settings > UDT Settings).
2.
Select one or more AD domain controllers in the list.
3. Click Assign security log access credentials.
4.
Select the relevant credential.
For information about credentials see "Managing Active Directory Credentials"
5. If you are ready to assign the credential to the selected node(s), click OK.
Deleting an AD Domain Controller
Follow these steps to delete a domain controller.
1. Click Manage Active Directory Domain Controller in the UDT Credentials area in UDT Settings
(Settings > UDT Settings).
2.
Select one or more AD domain controllers in the list.
3. Click Delete.
4. If you want to delete the node from UDT, select Delete node and data from UDT only.
5. If you want to delete the node from all SolarWinds products, select Delete node from all
modules.
6. Click Delete.
49
To Next Page
Loading...