SolarWinds UDT - Maintaining Licenses with License Manager; Installing License Manager

Ports Nodes
2,500 2500
5,000 5000
10,000 10,000
25,000 25,000
50,000 50,000
Unlimited Unlimited
Contact SolarWinds about upgrading your SolarWinds UDT license if needed.
SolarWinds UDT licenses do not have to mirror the license count of any other installed SolarWinds
product. For example, you can install SolarWinds UDT with a 50 node license on an SolarWinds NPM
server with an unlimited node license.
To see the available nodes and ports remaining in your license:
1.
Log in to the Orion Web Console with an administrator account.
2. Click DEVICE TRACKER.
3. Click UDT Settings.
4. Click UDT License Summary.
As an alternative, you can also click License Details in the Settings page to view the allowed and
current nodes and monitored ports.
Maintaining Licenses with License Manager
SolarWinds License Manager is an easily installed, free utility that gives you the ability to migrate Orion
licenses from one computer to another without contacting SolarWinds Customer Service. The following
sections provide procedures for installing and using License Manager:
n
Installing License Manager
n
Deactivating and Registering Licenses with the License Manager
Installing License Manager
Install License Manager on the computer from which you are migrating currently licensed products.
You must install License Manager on a computer with the correct time. If the time on the computer
is even slightly off, in either direction, from Greenwich Mean Time (GMT), you cannot reset licenses
without contacting SolarWinds Customer Service. Time zone settings neither affect nor cause this
issue.
To install License Manager:
33