SolarWinds UDT - Editing Existing Groups

11.
If you want to dynamically select group members based on shared
properties, follow these steps:
a. Click Add dynamic query.
b. Type a name for the query in the Dynamic query object name field.
c. Select an Orion Platform object type in the Orion Object is list.
d. Click Add Condition to specify further selection properties.
Note: Use the question mark (?) character as a multiple character
wildcard. Use the underscore (_) character as a single character wildcard.
e. Click Preview to verify that the dynamic query is selecting your intended
objects.
f. Click Save.
12.
Continue adding individual Orion Platform objects or dynamic queries until you
have finished building your group.
13. Click Create Group.
Editing Existing Groups
You can edit the properties of an existing group or add and remove objects. These
are separate editing tasks.
To edit properties of an existing group:
1. Click Start > All Programs > SolarWinds > Orion Web Console.
2. Click Settings in the top right of the web console.
3. Click Manage Groups in the Node & Group Management grouping of the Orion
Website Administration page.
4. Check the group you want to edit, and then click Edit Properties.
5. Edit the Name and Description of the selected group, as appropriate.
6.
If you want to manage the members of the selected group, click Add &
Remove Objects. For more information about managing group members, see
"Managing Group Members."
Note: Expand the Contains summary for the selected group to see all member
objects in the group.
7.
If you want to configure the calculation of displayed group status or the
frequency with which group status is refreshed, expand Advanced, select a
Status rollup mode, and then provide a Refresh frequency.
Note: For more information about status rollup for groups, see "Managing the
181
Editing Existing Groups