Creating Custom Properties
5.
Click the ellipsis, and then select from the following options:
Note: The lists of available linked descriptors are dynamically generated in
consideration of all other variables within the same condition. For more
information, see "Understanding Condition Groups." Click Browse (...) to select
a condition type.
n Select Add a new elementary condition to generate a condition that is
based on a direct comparison of network object data fields.
n Select Add a new advanced elementary condition to generate a
condition based on a comparison of device data fields and values.
n Select Add a new complex condition to define a condition that filters
other defined conditions.
n Select Delete current condition to remove a selected condition.
n Select Move current condition forward or Move current condition
backward to change the order of your conditions accordingly.
6.
Continue to click hyperlinked text and use the cascading menus to select
filtering criteria.
7. If you have completed the configuration of your filter, click OK.
Note: The Edit Object Properties view changes, based upon the selected filter, and
the text of the Filter Active / No Active Filter now displays "Filter Active", indicating
that the filter is being applied to the currently viewed properties.
Removing Custom Properties Filters
The following procedure removes a custom properties filter.
Note: Orion Network Performance Monitor users may also remove filters for interface
custom properties.
1. Click Start > All Programs > SolarWinds Orion > Grouping and Access Control >
Custom Property Editor.
2. Click Properties > Edit Object Properties, where Object is Node or Volume, as
appropriate.
3. Click Filter Active, and then click Remove Filter.
Note: The Edit Object Properties view now displays all custom properties.
315
To Next Page
Loading...