Resolving IP Address Conflicts with IPAM and
UDT Integration
Integration with UDT and IPAM is available with UDT v 3.2 and IPAM v 4.3 or higher. If
you are running both products, the built-in integration provides a view of end-to-end
mapping of an IP address to any connected user/device, along with the device port
and connection details all in the same window. If you are running UDT v 3.2 and IPAM
v 4.3 or higher, no steps are needed for integrating the two products. IPAM will
automatically detect if UDT is installed and add UDT users and switch port colums to
your IP address view. The following screen shot shows the display presented in the
IPAM "Manage Subnets & IP Address" resource.
Integrating IPAM with UDT can help you troubleshoot in the following ways:
n Find out which user or device is accessing a particular IP address
n Drill down to get network connection history for an IP address
87
Resolving IP Address Conflicts with IPAM and UDT Integration
To Next Page
Loading...