Common Tasks with SolarWinds UDT
4.
Enter the desired term for the search.
This example uses IP address '10.199.3.*" as the target subnet.
In this case we are searching for an exact match. In general, specific matches
are required sought unless wildcards are used in the search term. This means
that if you search for laptop and there is a machine named laptop01, you will
not find it unless you search for laptop01 or laptop* (or other valid wildcard
search).
More wildcard examples:
n Fa1* - (when used with Port Number search option) matches any port
number that begins with Fa1 followed by any characters.
n MAC Address: 00:0C*
n IP Address: 10.10.10.*
n Cisco3750-* (assuming each of three stacked switches were added as
individual devices, using a common naming convention like Cisco3750-
1, Cisco3750-2, Cisco3750-3; in this search you would select the
‘Connected To' drop-down list beside Search).
5.
Press Enter or click the search button to begin the search. The search
results are displayed in a scrollable, tabular view:
Match Item Match Type
10.199.3.1 Endpoint IP Address
10.199.3.10 Endpoint IP Address
10.199.3.100 Endpoint IP Address
10.199.3.101 Endpoint IP Address
10.199.3.102 Endpoint IP Address
10.199.3.103 Endpoint IP Address
... ...
6.
From the search results, you can select an item and then click Add To Watch
List in order to add the item to the device watch list.
86
To Next Page
Loading...