Using Orion Platform Advanced Alerts
Notes:
n
Alert Suppression is only available if you have checked Show Advanced
Features in the lower left of the Edit Advanced Alert window.
n In many cases, because suppression conditions are checked against all
monitored objects on your network, properly defining alert trigger conditions
may eliminate the need for alert suppression. For more information about
defining alert trigger conditions, see "Setting a Trigger Condition for an
Advanced Alert" and "Understanding Condition Groups."
To set conditions for advanced alert suppression:
1. Click Start > All Programs > SolarWinds > Alerting, Reporting, and Mapping >
Advanced Alert Manager.
2. Click View > Configure Alerts.
3. Click New or select an alert from the list.
4. Click Copy or Edit, as appropriate.
5.
Click Alert Suppression.
Note: Generate suppression conditions in the text field by selecting
appropriate descriptors from the linked context menus and by clicking Browse
(...) on the left of the text field.
6. If you want to copy the condition used on the Trigger Condition tab, click
Copy From Trigger.
7.
Click the linked text to select the number of conditions that you want to apply
(all, any, none, not all). For more information about linked text conditions, see
"Understanding Condition Groups"
8.
Click Browse (...) to view the following condition options:
n To generate a condition based on a comparison of device states, click
Add a Simple Condition.
n To generate a condition based on a comparison of device fields and
values, click Add a Complex Condition.
n To further define the application of your conditions, click Add a
Condition Group.
n To remove a selected condition, click Delete Current Condition.
n To change the order of your conditions, click Move Down or Move Up.
220
To Next Page
Loading...