Page 7-18 AWS 924-948 Operator’s Manual
Automation
To set up MMC locates, open the Machine Control tab in the Setup/Peripherals window and follow the configuration shown
below:
Enable MIDI Machine Control and select the Port on the MIDI Interface that is connected to AWS Port 4 MIDI IN or IP
MIDI Port 7. Leave the ID as 127 (this sends to all connected devices). Open the Operation tab in Setup/Preferences:
Enable the two options circled above. This ensures that the MMC locate messages are transmitted correctly from Pro
Tools.
Enable
these
options
To Next Page
Loading...
