Chapter 11 DME Operations
40
DME Special Effect Operations
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
4
In the <Flex Shadow Source> group, select the signal to use for the flex
shadow.
External: Generate the shadow using an input signal.
Internal: Generate the shadow using a full-size key signal.
Adjusting the size of the flex shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Size], turning it on.
2
Set the following parameters.
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
Setting the flex shadow color
Use the following procedure.
1
In the Flex Shadow menu, press [Shadow Color], turning it on.
Knob Parameter Adjustment Setting values
1 H Move shadow horizontally –8.00 to +8.00
2 V Move shadow vertically –4.50 to +4.50
3 Size All Enlarge or shrink horizontally and
vertically
Value of Size H (see
page 40) shown
4
Soft
a)
Softness of shadow 0.00 to 100.00
5 Density Density of shadow 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Size H Enlarge or shrink horizontally 0.00 to 2.00
2 Size V Enlarge or shrink vertically 0.00 to 2.00
3 Size All Enlarge or shrink horizontally and
vertically
Value of Size H
shown
4
Soft
a)
Softness of shadow 0.00 to 100.00
5 Density Density of shadow 0.00 to 100.00
To Next Page
Loading...
