Sony DVS-9000SF - Page 41

41DME Special Effect Operations
Chapter 11 DME Operations
2 Adjust the following parameters.
Setting the center point of the flex shadow
Use the following procedure.
1 In the Flex Shadow menu, press [Axis Loc], turning it on.
2 Adjust the following parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
•4:3 mode
• 16:9 mode
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Axis Loc H Move the shadow center axis
horizontally
–8.00 to +8.00
2 Axis Loc V Move the shadow center axis
vertically
–6.00 to +6.00
Knob Parameter Adjustment Setting values
1 Axis Loc H Move the shadow center axis
horizontally
–8.00 to +8.00
2 Axis Loc V Move the shadow center axis
vertically
–4.50 to +4.50