43DME Special Effect Operations
Chapter 11 DME Operations
Inverting the flex shadow
In the <Invert> group of the Flex Shadow menu, select the direction to invert
the shadow.
H: Invert the shadow in the horizontal direction. The inversion is applied
around the axis of the knob 2 parameter Axis Loc V set with [Axis Loc].
V: Invert the shadow in the vertical direction. The inversion is applied around
the axis of the knob 1 parameter Axis Loc H set with [Axis Loc].
Setting a combine shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Combine Shadow], turning it on.
2 Perspective V Add vertical perspective –100.00 to +100.00
Knob Parameter Adjustment Setting values
Perspective
H = –100
Perspective
H = +100
Perspective
V = –100
Perspective
V = +100
Picture
When H is enabled When V is enabled
Flex shadow
Before inversion
Before inversion
After inversion
After inversion
To Next Page
Loading...
