Chapter 11 DME Operations
76
DME Special Effect Operations
Broken Glass settings
The Broken Glass effect partitions the image like broken glass, with shards
flying outward.
To apply the Broken Glass effect
Display the Broken Glass menu.
The functions of the knobs in the Broken Glass menu are the same as those of
the Rings menu, with the exception of [Direction].
For details about operation, see “Rings settings” (page 75).
To fix the direction in which shards scatter
Press [Direction], turning it on.
Flying Bar settings
The Flying Bar effect divides the image into bars which peel off in two blocks
as they move.
To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following procedure.
1
To make transition settings, press [Transition] and set the following
parameters.
2
To set the partition method, press [Partition] and set the following
parameters.
Blind settings
The Blind effect divides the image into bars or wedges, with blocks rotating
like the slats of venetian blinds.
Knob Parameter Adjustment Setting values
1 Transition Degree of transition 0.000 to 100.000
2 Random Degree of randomness in distance
moved by each block
–100.000 to
+100.000
3 Angle Direction of movement –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Width Width of partition 0.000 to 100.000
2 Random Degree of randomness in partition
width
0.000 to 100.000
3 Angle Partition angle –8.000 to +8.000
To Next Page
Loading...
