Swivelling and sliding the swivel fork
90° synchronously
This function moves the turret head to the
front position through a synchronised move-
ment involving shifting and swivelling. This
means that the swivelling function automati-
cally stops at a swivel angle of 90 and the
sideshift automatically stops in a central posi-
tion in front of the cab. This function makes it
easier to pick up loads at the front of the truck.
Option
See the chapter entitled "Special equipment".
Fork cycle
This function enables an increase in handling
performance through automation of load pick
up and load deposit. The details of the fork cy-
cle function depend on the design of the in-
dustrial truck.
Option
See the chapter entitled "Special equipment".
Hydraulic special functions
Additional hydraulic functions are available as
an optional extras. Buttons (15)(16)(17) are
provided for operation of these additional func-
tions. See the chapter entitled "Special equip-
ment".
Operation
4
Load pick up
78 5231 804 2502 EN - 04/2020
To Next Page
Loading...
