Operation 5
Lifting
– Notify the service centre.
Load chains not under tension
DANGER
There is a danger that the load could suddenly fall.
– Make sure that the chain(s) does (do) not be-
come slack when lowering the load.
Slack chains can, for instance, result from:
• Resting the fork carriage or the load on the
racking.
• Fork carriage rollers blocking in the lift mast
due to dirt.
– If the fork carriage or the load comes to an
unexpected stop, raise the fork carriage
until the chains are under tension again
and lower the load at some other suitable
location.
– If the fork carriage rollers in the lift mast be-
come blocked because of dirt, raise the fork
carriage until the chains are under tension
again. Remove the dirt before proceeding
with work.
WARNING
Risk of injury!
– Heed the safety instructions for working on the
lift mast, see ⇒ Chapter "Working at the front of
the forklift truck", P. 6-192.
171673 [EN] 97
To Next Page
Loading...
Need help?
General
