6 Maintenance
Safety instructions for maintenance
7071_003-019
Jacking up at the lift mast
– Lift the fork carriage and secure against
accidental lowering.
WARNING
Risk of injury!
Observe the safety regulations for working on lift
masts, see ⇒ Chapter "Working at the front of the
forklift truck", P. 6-192.
– Apply the jack at the mast.
– Jack up the truck until the wheels are no
longer in contact with the ground.
– Secure the truck.
WARNING
Risk of injury!
Do not jack up truck by rear weight.
7081_003-009
1
2
Working at the front of the forklift
truck
WARNING
Risk of accident!
If the lift mast or fork carriage is raised, no work
must be performed on the lift mast or at the front
of the forklift truck without observing the following
safety measures!
Removing the lift mast
CAUTION
This work must only be performed by a service tech-
nician.
– Fasten the lifting gear to the upper part of the
bridge piece (2) on the outer mast of the lift mast.
Securing against tilting back
– The lift mast must be secured against unin-
tentionally tilting back by clamping in place
a suitable hardwood timber, dimensions
120 x 120 x 1100 mm. (1).
192 171673 [EN]
To Next Page
Loading...
Need help?
General
