Operation 5
Working with loads
7090_800-015
7090_800-003
Depositing and retrieving loading
units
– Drive up to the stack with the load lowered
in accordance with operating instructions.
– Place the lift mast in a vertical position.
WARNING
Risk of accident!
If your forklift truck is equipped with greater forward
tilt (special equipment) (over 3°), the load can slip
or the forklift truck can tip over.
– Lift the load to the stack height.
WARNING
Risk of accident!
Tilt the mast forward with raised load-carrying
equipment only when it is directly over the stack.
– Carefully drive the truck forward into the
stack.
– Lower the load until it is resting safety on the
racking.
– Look behind you!
– Back the truck away until you can lower the
fork arms without touching the stack.
– Lower the fork arms to the ground clearance
position.
– Tilt the mast backward and drive away.
WARNING
Risk of accident!
– When retrieving a load, back away until you can
lower the load and fork arms freely.
171673 [EN] 113
To Next Page
Loading...
Need help?
General
