Still R70-40T User Manual

Maintenance 6
General maintenance information
Intervals for maintenance and in-
spection
The work shall be performed by your service
centre according to the maintenance intervals
listed below.
Maintenance after 50 operating hours
Position Maintenance work
-
Maintenance during the break-in period; see ⇒ Chapter "Maintenance
during the break-in period", P. 6-199
Maintenance as required
Position Maintenance work
-
Clean truck, see ⇒ Chapter "Cleaning", P. 196
-
Clean radiator, checking seal, see ⇒ Chapter "Cleaning the radiator,
checking for leaks", P. 6-200
-
Topping up coolant and checking concentration of coolant additive,
see ⇒ Chapter "Topping up coolant and checking coolant concentra-
tion", P. 6-200
-
Replace air filter insert, see ⇒ Chapter "Changing the air filter in-
sert", P. 6-202
-
Service battery, see ⇒ Chapter "Servicing the battery", P. 6-204
-
Service hydraulic equipment, see ⇒ Chapter "Maintaining hydraulic
equipment", P. 6-207
7
Service wheels and tyres, see ⇒ Chapter "Servicing wheels and
tyres", P. 6-208
-
Check foot brake setting, see ⇒ Chapter "Checking adjustment of the
footbrake", P. 6-209
-
Check parking brake setting, see ⇒ Chapter "Checking the parking
brake setting", P. 6-210
-
Joints and controls, see ⇒ Chapter "Lubricating joints and con-
trols", P. 6-211
-
Check door locking, see ⇒ Chapter "Checking the door latch", P. 6-211
6
Servicesteeringaxle,see⇒Chapter"Maintainingthesteering
axle", P. 6-211
1
Service mast bearings, see ⇒ Chapter "Servicing the mast bear-
ing", P. 6-214
171673 [EN] 181

Still R70-40T Specifications

General

Brand	Still
Model	R70-40T
Category	Forklifts
Language	English