5 Operation
Error messages
7071_003-085
BREMSGEBER
BREMSGEBER (BRAKE SENSOR)
message
If the BREMSGEBER (BRAKE SENSOR)
message appears, the maximum driving
speed is reduced. The brake sensor in the
brake pedal must be checked.
– Contact your service centre.
7071_003-088
UEBERWACHUNG
SURVEILLANCE message
If the UEBERWACHUNG (SURVEILLANCE)
message appears, a fault has occurred in the
process monitoring.
This shuts off the traction drive.
– Place the key switch in the "0" position and
then back in the "I" position.
– Start the engine; see ⇒ Chapter "Starting
the engine", P. 5-68.
– Take your foot off the accelerator pedal.
– Select the direction of travel again.
NOTE
If this error code appears sporadically, it can
be tolerated. If usability is impaired, please
contact your service centre.
150 171673 [EN]
To Next Page
Loading...
Need help?
General
