Still R70-40T User Manual

Operation 5
Error messages
Fault code table
The table provides you with an overview of the
possible displays. The "Comment" column
contains information about the procedure to
follow when the corresponding messages are
displayed.
Message text (German) /
Error code
Display animation
Comment
OVERHEATING
A5022
Cyclic display every
30 sec
Traction motor(s) is/are too hot.
1. Phase: Regulation of acceleration and
speed
2. Phase: Limitation of phase current in
converter (emergency driving function is
maintained).
Fault is automatically cancelled as soon as
the temperature drops below the limit.
If the fault occurs repeatedly, contact your
service centre.
PARAMETERS
A1206
A1211
Cyclic display every
30 sec
Traction and hydraulic drives not functioning
Contact your service centre.
ACCELERATOR
A3002
A3003
A3004
A3005
A3006
A3007
Cyclic display every
30 sec
Sensor fault, vehicle cannot be driven.
Contact your service centre.
ACCELERATOR
A3811
Cyclic display every
30 sec
Accelerator configuration incorrect. Vehicle
cannot be driven.
Contact your service centre.
BRAKE
A3016
A3017
Cyclic display every
30 sec
Sensor fault, vehicle can only be driven at
crawling speed.
Contact your service centre.
KONFIGURATION
(CONFIGURATION)
A2111
Cyclic display every
30 sec
Programming error or defective printed
circuit board, traction and hydraulic drive
not functioning.
Contact your service centre.
KONFIGURATION
(CONFIGURATION)
A3801
Cyclic display every
30 sec
Programming error, traction and hydraulic
drive not functioning.
Contact your service centre.
171673 [EN] 139

Still R70-40T Specifications

General

Brand	Still
Model	R70-40T
Category	Forklifts
Language	English